DRAGONFRAME 4 EDIT DOWN DIALOGUE MANUAL

Do not capture frames too quickly - this will cause Dragonframe to crash and may corrupt your last captured frame.This will take a moment to transfer the still image file from the camera to the Dragonframe software.To begin capturing frames press the enter key on the numeric keypad.Click the camera icon below the view pane to return to live view.The camera settings will be viewable in the top right corner of the Cinematography window.Click on a test shot to look at it in the view pane.They will have better focus, exposure and depth of field.Test shots will look better than the live view images.

After changing any camera settings take a new test shot.Use the depth of field slider - the line between the shutter speed and f-stop to change the depth of field while keeping the exposure the same.Always shoot a test shot to get an accurate preview of the depth of field.Then adjust the shutter speed to get the desired exposure.When shooting 3d objects or using the multiplane adjust the f-stop to get the desired range of depth of field.When shooting flat artwork use the smallest f-stop possible.A larger f-stop has a wider depth of field.A smaller f-stop has a narrower depth of field.Depth of field is the zone of a photograph that is in focus.Adjust the shutter speed for the desired exposure.When the image is in focus, and exposed properly (not too dark, not too bright), click on the animate button to return to the Animation screen.The Test Shot button is located underneath the camera settings of Cinematography. Take a test shot after each adjustment to confirm the exposure.Drag the line (depth of field slider) between the f-stop and shutter speed setting to adjust both at once.Adjust the f-stop (aperture) and shutter speed dials by clicking and dragging to the right or left to adjust exposure.Make sure you don't touch the lens with your bare fingers. When using the multi-plane, rotate the outer polarizing filter until there is a reduction in glare.To zoom out, double click the rectangle box.For auto focus click the focus buttons in Dragonframe until everything is sharp.

DRAGONFRAME 4 EDIT DOWN DIALOGUE MANUAL

For manual focus slowly turn the focus ring on the lens until everything is sharp.

Double click in the rectangle box to zoom in.

Position the rectangle to where you want to focus.

Set camera lens to either MF manual focus or AF autofocus.

Set the focus by first placing one of focus guides on the table.

While still in the Cinematography window confirm the camera settings are: On the top right of the screen to enter the Cinematography window.

Adjust polarizing filter on camera by hand.

Check framing so that the artwork overfills the screen and make sure any content, and titles, fall within the boundaries of the Action/Title Safe reference guides.

Adjust the framing by moving the camera up or down the column, and position the table using the cranks.

Next to Composition Guides click the + add a broadcast safe overlayР”Р„: TV-Safe Overlay B: Grid Overlay C: Opacity Set Up Artwork.

Adjust the horizontal and vertical sections as needed.

Next to Composition Guides click the + to add a grid.

In the Aspect Ratio Mask section set the Aspect Ratio to match the 16:9 or 4:3 setting above.

Select Aspect Ratio Lines and select Outline and/or Crosshairs as needed.

Select Aspect Ratio Mask and choose 16:9 (rectangular), 4:3 (square) depending on the requirements for your assignment.

In the Animation window, click on the Guide Layers tab.

or in the menu bar go to View > Orientation > Rotate.

This should be enabled by default in the 2D labs.

Dragonframe has a setting to rotate the image.

The cameras are mounted upside down in the 2D Labs.

Set the frames per second for playback speed:.

a red outline will appear around the window signifying that live view is enabled.

If you do not see the live camera feed from the animation stand press command R to refresh the live camera feed.

Click New Folder and give it a name and hit Create.

In the new window that opens browse to your desktop.

Name your production, 5 characters maximum.

Select Create New Scene from the dialog box, or open a previously created scene with Open Scene.

Turn on the power strip for the camera and lights.

Secure the pegbar to the animation stand with some paper tape and position your artwork.

2.2 Set the Aspect Ratio for the project.

Dragonframe 4 edit down dialogue